TW
EN
TH
HT-2328 Computer Type Single Column Material Testing Machine
Computer Type Single Column Material Testing Machine
Specifications
| Model | HT-2328, HT-2328BP, HT-2328BI | ||||||
|---|---|---|---|---|---|---|---|
| Capacity | kN | 2 | 1 | 0.5 | 0.2 | 0.1 | |
| Standard-accuracy type | Accuracy of test force is better than ±1% within the range 1/1~1/50 of full scale of load cell | ||||||
| Unit | Load cell | HT-8336 High precision tension/compression load cell as standard (maximum force x 1set, with excellent expanding feature, available to connect some load cells at a time - optional) | |||||
| Load amplification | Type HT-2328 equipped with HUNG TA interface system, available with: (A,B select one) (A) x1, x2, x5, x10, x20, x50, x100 seven scales with auto range function,resolution 1/2000 (B) x1, x2, x5, x10 four scales with auto range function, resolution 1/20000 |
||||||
| Type HT-2328AP, HT-2328AI Equipped with HT-2010 control indicator, available with x1, x2, x5, x10 four scales with auto range function, resolution 1/20000 |
|||||||
| Test speed range (select one) | A: Servo motor type: 0.005~1000 mm/min (Suitable for HT-2328 only) |
||||||
| B: Servo motor type: 0.05~1000 mm/min (Suitable for HT-2328BP only) |
|||||||
| C: DC motor type : 10~500 mm/min (Suitable for HT-2328BP only) |
|||||||
| D: DC motor type : 10~1000 mm/min (Suitable for HT-2328BP only) |
|||||||
| E: DC motor type : 0.5~1000 mm/min (Suitable for HT-2328 only) |
|||||||
| F: DC motor type : 100~1000 mm/min | |||||||
| Effective test depth | 125 mm (distance of clamping center to column side) | ||||||
| Crosshead working table distance | standard type: 750 mm / special type: 1150 mm | ||||||
| Test stroke (equipped with standard tensile grips) | standard type: 560 mm / special type: 960 mm | ||||||
| Over-travel & Overload protection function | Stroke up & down position protection setting, when test force exceeds 10% of full scale, system auto stop to protection the system from overloaded. | ||||||
| Power | Consumption | 0.5 kVA | |||||
| Power source | 1ø, 220 VAC, 50/60 Hz | ||||||
| Dimensions | Console (WxDxH) | standard type: 56x50x126 cm / special type: 56x50x166 cm | |||||
| Unit | 100x48x42 cm (computer hardware + monitor + printer) | ||||||
| Console | standard type:54 kg / special type: 60 kg | ||||||
| Standard accessories | Tensile grips x 1set, tool kit x 1set, operation manual x 1set, certificate of calibration x 1set | ||||||