HT-8045A | HUNGTA

HT-8045A Constant Temperature & Humidity Chamber ( Programmable )

Constant Temperature & Humidity Chamber ( Programmable )
Program Features
1. Maximum cycle settings: 1 pattern x 99 steps x 99 cycles. Program can be divided into subprograms with individual number of cycles
2. Maximum duration for each program is 99 hr 59 min
3. Controller provides memory recovery in case of power interruptions. Remaining unfinished program can be continued if power was interrupted during testing
4. Remaining test time display
5. Available in programmable or direct display ( for single temperature and humidity settings )

Control Characteristics
1. Capable of slope control
2. Four output channels ( for recorder )
3. PID control for temperature & humidity
4. Configurable alarm for temperature & humidity
5. Remote control system available for remote program execution

Specifications

Model	HTL-225A HTL-225B	HTL-408A HTL-408B	HTL-800A HTL-800B	HTM-150A HTM-150B	HTM-225A HTM-225B	HTM-408A HTM-408B
System	Balanced temperature & humidity control system
Temp. Range	-70~+100°C (+150°C option)			-45~+100°C (+150°C option)
Humid Range	30~95%RH	30~95%RH	30~95%RH	30~95%RH	30~95%RH	30~95%RH
Temp.Constancy	±0.3°C	±0.3°C	±0.3°C	±0.3°C	±0.3°C	±0.3°C
Humid Constancy	±3%RH	±3%RH	±3%RH	±3%RH	±3%RH
Temp. Uniformity	±1.0°C	±1.0°C	±1.0°C	±1.0°C	±1.0°C
Humid Uniformity	±4%RH	±4%RH	±5%RH	±4%RH	±4%RH	±4%RH
Heat-up time	-70°C~+100°C, approx 70 min.			-45°C~+100°C, approx 45 min.
Cool down time	+20°C to -70°C within 90 min.			+20°C to -45°C within 60 min.
Inside Dimensions (WxHxD) cm	50x75x60	60x85x80	100x100x80	50x60x50	50x75x60	60x85x80
Outside Dimensions	102x162x118	12x172x138	152x187x138	102x147x108	102x162x118	112x172x138
Interior material	SUS#304 stainless steel plate
Exterior material	SUS#304 stainless steel plate
Insulation material	Rigid polyurethane foam & glass wool at 150°C
Refrigeration system	Air cooled
Refrigeration system	hermetic compressor, single stage refrigeration system			hermetic compressor, cascade refrigeration system
Safety devices	no fuse brea ker, refrigerator overload relay, refrigerator high pressure switch, over-temp. protector, protection fuse, water level protector, protection relay, system trouble monitor alarm
Accessories	viewing window, shelves (freely adjustable 2 pcs), cable port (50 mm dia.) and chamber lamp
Power supply	1Ø, AC200V±10%, 50/60Hz

Model	HTM-800A HTM-800B	HT-150A HT-150B	HT-225A HT-225B	HT-408A HT-408B	HT-800A HT-800B	HT-8045C
System	Balanced temperature & humidity control system
Temp. Range	-45~+100°C (+150°C option)	-30°C ~+100°C (+150°C option)				0~85°C
Humid Range	30~95%RH	30~95%RH	30~95%RH	30~95%RH	30~95%RH	30~95%RH
Temp.Constancy	±0.3°C	±0.3°C	±0.3°C	±0.3°C	±0.3°C	±1.0°C
Humid Constancy	±3%RH	±3%RH	±3%RH	±3%RH	±3%RH	±3%RH
Temp. Uniformity	±1.0°C	±1.0°C	±1.0°C	±1.0°C	±1.0°C	±1.0°C
Humid Uniformity	±5%RH	±4%RH	±4%RH	±4%RH	±5%RH	±5%RH
Heat-up time	-45°C~+100°C, approx 45 min.		-30°C~+100°C, approx 35 min.
Cool down time	+20°C to -45°C within 90 min.	+20°C to -30°C within 45 min.
Inside Dimensions (WxHxD) cm	100x100x80	50x60x50	50x75x60	60x85x80	100x100x80	40x40x45
Outside Dimensions	152x187x138	102x147x108	102x162x118	112x172x138	152x187x138	90x80x82
Interior material	SUS#304 stainless steel plate
Exterior material	SUS#304 stainless steel plate
Insulation material	Rigid polyurethane foam & glass wool at 150°C
Refrigeration system	Air cooled
Refrigeration system	hermetic compressor, dual stage refrigeration system
Safety devices	no fuse brea ker, refrigerator overload relay, refrigerator high pressure switch, over-temp. protector, protection fuse, water level protector, protection relay, system trouble monitor alarm
Accessories	viewing window, shelves (freely adjustable 2 pcs), cable port (50 mm dia.) and chamber lamp
Power supply	1Ø, AC200V±10%, 50/60Hz

รถยนต์ & รถจักรยานยนต์

HT-8045A Constant Temperature & Humidity Chamber ( Programmable )